|
|
|
2
|
|
Sector
|
Minerals Tenders
|
Tender Value
|
N.A.
|
|
Location
|
Madhya Pradesh Tenders
|
Ref.No
|
40105064
|
|
Closing Date
|
31 - Jul - 2020
|
16 Days to go
|
View Tender Details
|
|
Supply of Concave 1st tier, key for concave 1st, concave 2nd tier, key concave 2nd, concave 3rd tier, key concave 3rd, concave 4th tier, key concave 4th, upper concave, upper key concave, middle concave, middle key concave, lower concave, lower key concave
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8
|
|
Sector
|
Corporations/ Assoc/ Chambers/ Govt Agencies Tenders
|
Tender Value
|
 3 Million / 30 Lakh
|
|
Location
|
Tripura Tenders
|
Ref.No
|
40168290
|
|
Closing Date
|
28 - Jul - 2020
|
13 Days to go
|
View Tender Details
|
|
Procurement of river sand and black sand, wood (gamair, karai, soft, segun, sal), steel items (grill, rolling shutter etc and fabrication of steel work), aluminum door, window, partition complete set including fitting fixing, pty wood/hard board / plastic chair (vip) etc, various hardware items/petty materials/ glass, internal electrification items excluding fitting fixing, ceramic/vitrified tiles, marbles, adhesive etc.
|
|
|
|
|
|
10
|
|
Sector
|
Municipal Corporations Tenders
|
Tender Value
|
7.53 Lakh approx.
|
|
Location
|
Kerala Tenders
|
Ref.No
|
40093838
|
|
Closing Date
|
27 - Jul - 2020
|
12 Days to go
|
View Tender Details
|
|
Supply of materials for anganwadi construction - stone aggregate (single size) : 40mm nominal size, stone aggregate (single size) : 20mm nominal size, coarse sand (zone iii ), portland cement, structural steel as tees angles channels and r.s. joist, red oxide zinc chromate primer, stone aggregate (single size ): 10 mm nominal size , royality for good earth, solid blocks of size 40x20x15 cm, twisted steel/deformed bars, anjili wood scantls, fine sand (zone iv), bright finished or black enamaled mild steel butt hinges 100x58x1.90mm, bright finished or black enamaled mild steel butt hinges 50x37x1.50mm, bright finished or black enamaled mild steel screws 40 mm, bright finished or black enamaled mild steel screws 20 mm, anjili wood planks, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm ), mild steel round bar above 12 mm dia, flats up to 10 mm in thickness, rawl plug 50 mm (designation 10 nos ), vitrified floor tile 60 x 60 cm, ceramic glazed tile 1st quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., ceramic glazed tile 1st quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, water thinnable cement primer for interior wall surface, having voc content less than 50 gms/liter, water proofing cement paint, synthetic enamal paint in black or chocolate shade, epoxy paint, vitreous china orrisa type w.c pan size 580 mm , flushing cistern p.v.c 10 lts capacity (low level ) (white) (with fittings, accessories and flush pipe), 100mm s.c.i trap with vent heel, stainless steel kitchen sink - without drain board 470 x 420 mm bowl depth 178 mm, c.i bracket for wash basin and sinks, pvc pipe 20 mm outer dia 10 kgf/cm2, pvc pipe 32 mm outer dia 10 kgf/cm2, pvc pipe 40 mm outer dia 6 kgf/cm2, pvc pipe 110 mm outer dia 4 kgf/cm2, polyethylene water storage tank with cover and suitable locking arrangement, 24 mm thick factory made shutters with styles , rails and panels of pvc extruded sections in white, grey or wooden finish, pvc elbow 63 mm dia, pvc door elbow 63 mm dia, pvc bend 63 mm dia, pvc door tee 63x63x63 mm dia, pvc vent cowl 63 mm dia, pvc elbow 110 mm dia, pvc bent 110 mm dia, pvc tee 110x110x110 mm dia, pvc door tee 110x110x110 mm dia, semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, brass mortice latch and lock 100x 65 mm with 6 levers and a pair of brass lever handles, iron hooks and eye 100mm, 200 mm aluminium aldrop, anodised aluminium tower bolt (barrel type ) 300x10 mm, chromium plated brass scews 30 mm, anodised aluminium handles 125 mm with plate 175x 32 mm, chromium plated brass scews 25 mm, acrylic exterior paint, exterior primer, mild steel tubes hot finished welded type , welding by electric plant, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, bitumen washer, g.i limpet washer, galvanised steel j or l 8mm dia , galvanised steel bolts and nuts 6 mm dia and 25 mm long round head with slots, display board, quary waste.
|
|
|