| Sector | abcRailways Transport Services | Tender Value | N.A. | Location | Haryana - India | Ref.No | 42429757 | Closing Date | 02 - Feb - 2021 | | | Supply of line filter for dc ballast, part no. u15 supply of smps transformer for dc ballast, part no. etd 39 (25x9x6) supply of ic/saloon hvac/plc, part no. z8s18033vsg specification plcc type, preferred make- zilog supply of hand gloves for electronics lab, specification copper fibre gloves, size m, surface resistance10^8-10^11 ohm, equivalent to model no. bs-gl-1305, preferred make- blue sky supply of storage rack for electronics lab, specification external size 355 x320 x563 mm, width 5mm,depth 3.5mm, pitch 10mm, pcb slot 50, adjustable width 35-254 ref. position a34 b@58"44@ side boardstructure 5 sheets base material metal, temperature resistance 100/120/150°c, equivalent to model no.-9805301b1, preferred make blue sky/rohs supply of esd safe bin for electronics lab, specification outside dimensions in mm 220(l) x 130(w) x125(h), inside dimensions in mm 200(l) x 115(w) x 115(h), material-polypropylene copolymer,equivalent to model no.- sb3-c, preferred make- alkon/blue sky supply of wrist strap footwear tester for electronics lab, specification range wrist strap 0.75 to 10 megohms, foot wear 0.75 to 100 meg ohms, range selection by slide switch, indications pass - green led,low & high fail - red led (with alarm), test actuation by pressing metal sensor plate, accuracy +/- 10%,power supply 9 volt battery, battery status by dual color led, dimensions 135 x 70 x 25 mm, weight app. 150gms with battery, equivalent to model no.- bs-wsft-1002, preferred make- blue sky supply of antistatic charge meter for elex lab, model no.- bs-scn-1104 (digital) equivalent to model no.-bs-scn-1104 (digital), preferred make blue sky supply of esd bench top fume absorber for elex lab, specification absorption capability 1m^3 /min.,outer dimensions 220(w) x 168(d), weight 1.5 kg, power consumption less than 23 watt, 220-240v, 50 hzinput, absorption capacity with filter 1.07 m /min, noise level less than 50 dba, equivalent to model no. at-123fa, preferred make- advance tech supply of wire striper 0.81 to 2.59 mm for elex lab, specification cutting capacity 30-20 awg, wirediameter ø 0.81- ø 2.59 mm with three functions shears, multi-diameter wire stripper and plier. length 174mm, equivalent to model no.- csp30.2, preferred make- piergiacomi supply of wonder mask p for elex lab, specification viscosity 28,000-30,000 cps, suggested thickness 20-30 mils, thinner di water, cure time 1hr. ambient, 30 min.@ 65°c, 20 min. @ 82°c, equivalent to model no.-2211-8sq, preferred make- techspray supply of ic for electronics lab, part no. s458xrur0814, make -eeti supply of p channel mosfet for elex lab, 8 pin, part no fds4435 bz, make fairchild supply of electrolytic capacitor for ac ballast, specification 120uf, 400v, preferred make keltron, philips supply of smd resistor for electronics lab, specification 33 ohm, make- rohs/thakral/rohm supply of ic for electronics lab, part no. js28f640j3d75, make intel supply of ic for electronics lab, part no. k4s281632i-uc75, make samsung supply of zener diode /rs-3/9/ for head light for elex lab, part no.- kdz3.3v, specification- vz 3.1v-3.5v,iz 5ma, preferred make- kec/on semiconductor/rohm semiconductor supply of smd transistor for electronics lab, part no. mmbt3904, specification type npn, smd,ic 200madc, pd 225 mw, ta = 25°c make stmicro/fairchild/nxp supply of led/rs-3/9/ dol for electronics lab, part no.- kpt-1608-ec071, specification amber yellowcolor, 20ma, 2.2 volt dc, 5mm, preferred make kingbright supply of mosfet /head light for elex lab, part no. k2415, preferred make nec supply of resistance through hole for dc ballast, 12 ohm, 2w preferred make rohs/thakral/rohm supply of resistance through hole for dc ballast, 15 ohm, 2w, preferred make rohs/thakral/rohm supply of smd capacitor(1206) for dol, 6nf, package- 1206 preferred make rohs/thakral/rohm supply of smd capacitor(1206) for dol, 1.16 microf, package- 1206, preferred makerohs/thakral/rohm supply of bga flux/soldring for elex lab, flash point 158 degree c insoluble in water, auto-ignition point->370 degree c, specific gravity- 1032 g/ml, viscosity @ 20 °c - ± 210.000 cps, part no.- if-8300 or equivalent,preferred make interflux electronics |
|
|
If you are a new user, then please
register, it's Free and then fill the form below.
If you are registered with us, just fill the form below, we will get back to you
shortly.
|
All fileds marked with '*' are compulsary.
|
|
|